Post Wiki

User Tools

Site Tools

Trace:
mc:py_mill-turn_planes

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
mc:py_mill-turn_planes [2022/04/27 15:17] – russellmc:py_mill-turn_planes [2024/05/22 13:53] (current) – russell
Line 2: Line 2:
  
 The set up of the LMD post version is intended to simplify milling planes vs traditional mill-turn posts. The set up of the LMD post version is intended to simplify milling planes vs traditional mill-turn posts.
- 
-  - To set up the axes for turning, you must set up a "Turning WCS" which will behave like traditional top plane turning 
-    - The "Turning WCS" X-axis should be aligned with the turning axis (machine Z at rotation 0,0) and the "Turning WCS" Y-axis must be aligned with the turning tools radial approach, which is like the X-axis on a traditional lathe. The "Turning WCS" would be set up identically to normal lathe posts, with X as the turning axis, and Y as the tool approach (traditional X axis).  
  
   - The planes for milling are like a traditional mill in mastercam   - The planes for milling are like a traditional mill in mastercam
     - Set the part up standing up with the milling WCS XYZ axes all aligned with the machine's XYZ axes when the rotaries are at 0,0 For milling, any plane rotations from there will initiate a rotation at the machine     - Set the part up standing up with the milling WCS XYZ axes all aligned with the machine's XYZ axes when the rotaries are at 0,0 For milling, any plane rotations from there will initiate a rotation at the machine
     - For C-axis style operations, such as "C-axis Face Drill" mastercam needs the WCS X-axis as the turning axis much like traditional mcam lathe set-ups. You could use your "turning WCS" for these operations.     - For C-axis style operations, such as "C-axis Face Drill" mastercam needs the WCS X-axis as the turning axis much like traditional mcam lathe set-ups. You could use your "turning WCS" for these operations.
 +
 +
 +  - To set up the axes for turning, you must set up a "Turning WCS" which will behave like traditional top plane turning
 +    - The "Turning WCS" X-axis should be aligned with the turning axis (machine Z at rotation 0,0) and the "Turning WCS" Y-axis must be aligned with the turning tools radial approach, which is like the X-axis on a traditional lathe. The "Turning WCS" would be set up identically to normal lathe posts, with X as the turning axis, and Y as the tool approach (traditional X axis). 
  
 Below is a video from Postability on how to set up a WCS for the turning toolpaths. Once set up, you will need to use this as your "stock plane" and it should update all your turning toolpaths with this WCS. Below is a video from Postability on how to set up a WCS for the turning toolpaths. Once set up, you will need to use this as your "stock plane" and it should update all your turning toolpaths with this WCS.
 [[https://postability.com/lathewcs]] [[https://postability.com/lathewcs]]
  
mc/py_mill-turn_planes.txt · Last modified: 2024/05/22 13:53 by russell

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki